Colarus Group heat pump bracket is made with extra foot Length of 27 inches. It helps comply with the building codes, allowing enough breathing space to heat pump for optimum performance. Made from mild steel and powder coated, our brackets have extra durability to meet or exceed the market standards with the following features.
| Product Code | Size (Inches) | Color Finish |
|---|---|---|
| WBHP-182734-PC | 18″ x 27″ x 34″ | Powder Coated |
Features
- Twin lock provides a double strength linkage.
- Bubble level, anti-vibration mounts and Fast Set of
hardware are included for safe,
professional installation. - Partially pre-assembled for simple completion.
- Weight holding capacity : 200-220 Kg.
- Sheet Thickness: 2.0mm
Installation Instructions
Step 1: Connect hanging plate and base plate using long screws set.
Step 2: Place cross bar cross over hanging plates.
Step 3: Put cross bar onto the wall , Using the anchor set to fix.
Step 4: Place the vibration mount on the base plate and install
it using hex screw set.
Step 5: Adjust Screw.
Accessory List
• 4 pcs of vibration mount.
• 4 sets of Hex screw set.
• 4 pcs of Hex Nuts.
• 4 pcs of flat washers, used for vibration mount.
• 4 sets of anchors, used for the cross bar.
• 4 set of long screws set.
• 4 pcs flat washers, used for hanging plate and base plate.
• 2 adjust screws
Please Note:
• Take your time with the installation.
• Do not make any modifications to the bracket.
• Check that all the screws and the bolts are secured tightly before placing the unit on it.
• Check once a year for the loose screws and maintenance.
Specification
Click on the image to download: Spec Wall Mounting Bracket
